Equivalent to PR1005L, EC776SR
Formerly MIL-S-4383C
Used as a topcoat and an adhesive to bond synthetic rubber , metals, glass, and plastic. Also used as a fuel tank sloshing compound. AMS-S-4383C Shelf life 12 months
This is a hazardous material. Hazardous shipping charges will apply. Please see Hazmat Shipping.
Technical Bulletin
Product Description
Meets AMS-S-4383C
CS3600 is a one-part high bond strength adhesive which finds application in a wide variety of purposes, especially where resistance to oils, gasoline, aromatic fuels and corrosion is desired. Most materials such as synthetic rubber, metals, glass, and plastics can be bonded very effectively with this adhesive. CS3600 is also used as a top coat for polysulfide sealants in integral fuel tanks for aircraft.
Application
The surfaces to be bonded should be clean, dry, and free from oil, dirt, and grease. A thin even coat of CS3600 is brushed onto each surface to be bonded. If the surface is very porous more than one coat may be necessary in which case a drying time of 10 minutes is allowed between coats. Allow four days air dry for cure.
Bonding is accomplished by allowing the adhesive to dry to a tacky condition and then joining the surfaces and pressing or rolling firmly together to insure intimate contact (the tacky condition is reached when the adhesive adheres but is not transferred to the finger when touched). Bonding can also be accomplished by solvent reactivation or heat reactivation.
Coverage
One Gallon of CS3600 covers an area of approximately 200 square feet with a normal brush coat and approximately one mil dry film thickness.
Contact us for more technical information.
Updating...