Equivalent to P/S 707, P/S 894, PR1221, EC1239, EC801
Formerly MIL-S-7502/7124B
Cures at room temperature to a flexible resilient rubber, with excellent adhesion to metals. AMS -S-7124 Shelf life 12 months
This is a hazardous material. Hazardous shipping charges will apply. Please see Hazmat Shipping.
Technical Bulletin
Product Description
Meets AMS-S-7124
CS3201 is a two-part, polysulfide based compound which cures at room temperature to a flexible, resilient rubber with excellent adhesion to aluminum, titanium, stainless steel, steel, magnesium, and other materials. Proper mixing of CS3201 is assured by the contrasting colors of the two parts. Mixed CS3201, Class A is flowable and easily applied with a brush. The cured sealant is resistant to aircraft fuels, lubricants, oils, water, and weather, and remains flexible at low temperatures.
Surface Preparation
To obtain good adhesion, remove all traces of oil, wax, grease, dirt, or other contamination. This is done by wiping with a clean oil free solvent.
Mixing Instructions
Too 100 parts by weight of Part A add 7.5 by weight of Part B. Mix well to uniform consistency.
Application
CS3201, Class A may be applied with a brush. Specified application lives are based on the standard conditions of 77F and 50% relative humidity. Higher humidity will reduce the application life. Lower temperatures or lower humidity will extend the application life. For every 10F rise the application is reduced by one half, for every 10F drop, it is doubled.
Non Volatile Content
90%
Viscosity: Part A (Brookfield Spindle #5 @ 10 RPM)
200 Poises
Vertical Flow
0.15 Inches
Tack Free Time (Hours)
24
Cure Time (Hours) To 30 REX
44
Contact us for more technical information.
Updating...